Sony WH-CH520 Battery Replacement

Written By: Brenna Caliri
  • Comments: 0
Sony WH-CH520 Battery Replacement

Difficulty

Moderate

Steps

6

Time Required

15 minutes

Introduction

Over time or with overuse, batteries can become corroded. If you notice the battery life decreasing significantly or possibly a strange smell coming from the Sony WH-CH520, it could mean it's time for a battery change. Replacing a battery requires being able to handle tools in small electronics and soldering experience.

  1. vxOTr4E4lc2xA4Hd
    vxOTr4E4lc2xA4Hd
    hWj1NyE1pnhq1XaM
    33PJEQqLTVn4UI2t

    • Lay headphones flat against the surface with the ear cushions oriented upwards.

    • Pinch the cushion of the right labeled headphone near the edge of the device to carefully pull the cushion off.

  2. bKFYRCGLCpVYrBSI
    bKFYRCGLCpVYrBSI
    qJECDFLgTlSB3BwN

    • Remove the three 2.5 mm screws from the headphones using a JIS #00 screwdriver.

  3. WUglaeJVPOg2waET
    WUglaeJVPOg2waET
    CUu6e3IxnSCADiRt
    HRIi4vStqFy2pyNV

    • Place one end of an opening tool against the edge of the base with the hook-like side pushing up against the covering.

    • Carefully pull the tool down against the edge to lift the covering.

    • Move the tool to different spots around the base of the headphones to pry it up until the covering comes off.

  4. BNFZul35EWbbHbHI
    BNFZul35EWbbHbHI
    fyvHgvVRgTWBYiLA

    • Carefully remove the film adhesive on top of the battery using a pair of tweezers.

  5. JcCq1v16GkXCDYnY
    JcCq1v16GkXCDYnY
    LwjfZrUAsJIsScXH
    5ndJaflHSpfAvOfX

    • Carefully pry the battery up and off of its adhesive using a spudger.

    • You can rest the battery in its well to prevent it from getting in the way later

  6. eKqqPL6NxAHaQay4
    eKqqPL6NxAHaQay4
    eKxfTakqABCkQhnE
    AuCTrCfgWoXwhdSf

    • Find the wires connecting the motherboard to the battery.

    • Remember which wires are positive and negative.

    • Using a soldering iron, carefully desolder the red and black wires from the motherboard and replace with the new battery and wires.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Brenna Caliri

Member since: 18/10/24

133 Reputation

0 comments