Sony WH-CH520 Severed Wire Repair

Written By: Crystal Stromberg
  • Comments: 0
Sony WH-CH520 Severed Wire Repair

Difficulty

Moderate

Steps

5

Time Required

10 minutes

Introduction

This guide is intended to help you reattach a severed headphone on Sony WH-CH520 wireless headphones using a soldering iron.

Before reattaching your headphone, you should verify that the sound is still working and the connecting wire is free of physical damage. This guide includes soldering; take caution while working with a heated soldering iron and melting materials.

  1. yfnxGZafqWeJJd5A

    • Plug in the soldering iron, allowing it time to heat to 480 degrees Fahrenheit.

  2. tvSxOcFuY6gbN5Q5
    tvSxOcFuY6gbN5Q5
    xgrdiIVk2igVPREH

    • Gently feed the wire back into the headband piece of the headset.

  3. oO1idnCBKC2TrlcI

    • Seat the headphone back into the headset, making sure to keep it angled in the desired direction.

  4. AM4U4vdhCMw61jqH

    • Apply the soldering tip around the circumference where the headphone and headset meet, allowing the tip to rest for about one second in each area it touches.

    • Soldering involves using a high degree of heat. Avoid touching the soldering tip or the melted materials as they cool.

  5. i6xc6XXRn12XrPfu

    • Apply steady pressure to the headset while the heat soaks in and the plastic cools. This should take about 2 minutes.

Author

Crystal Stromberg

Member since: 22/09/24

121 Reputation

0 comments