SuperTooth Buddy Battery replacement

Written By: markus1980wien
  • Comments: 3
SuperTooth Buddy Battery replacement

Difficulty

Moderate

Steps

5

Time Required

No estimate

Introduction

Replacing the battery in the SuperTooth buddy hands-free system.

  1. etjcMMMoHqYxLwtM

    • Carefully lift off the glued on cover.

  2. mGEnxfSrXxAYBjWF

    • Remove the two screws on the right.

    • There is also a small screw to the left of the green button

  3. qatJVXPNsDBLeTDs

    • There are also two screws on the back that need to be removed

  4. 6tEOvBoKgpbrXgyt

    • Be careful when lifting off the cover so as not to damage the two thin speaker cables.

    • Carefully remove the two screws holding the circuit board in place.

    • The battery is located under the circuit board

  5. s3q2brQTGRZ5KFje

    • Order a replacement battery online.

    • Li-ION 3.7V 650mAh 2.41 Wh

    • Make sure that the new battery has the same dimensions as the old one. (In this case it was approx. 50mm x 30mm x 4mm.

    Ce modèle est souvent vendu sous la référence 043048 (en fait, la taille de l'accu : 4x30x48mm !).

    Jean Luc -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

markus1980wien

Member since: 27/09/15

143 Reputation

2 comments

Ottime istruzioni per lo smontaggio. Grazie. Fino ad ora non ho trovato la batteria sostitutiva su internet. Spero di trovarla.

Eva Verlicchi -

Si può sostituire con una simile, che si trova su Ebay o su Aliexpress, il modello e: ***Batteria a litio 600mAh 3.7 V ricaricabile misura 503040 per dispositivi elettronici. Il Link: https://www.ebay.it/itm/175641031768 oppure: https://it.aliexpress.com/item/322148476...

Claus Col -