Tatung TAC-6G Heating Element Replacement

Written By: John David Mitchell

Comments: 7

Tatung TAC-6G Heating Element Replacement

Difficulty

Moderate

Steps

Time Required

30 - 50 minutes

Introduction

The rice cooker contains a heating element responsible for heating and cooking the rice while it is turned on. In this guide we will show how to expose the heating element of the Tatung TAC-6G rice cooker and replace it.

Tools

64 Bit Driver Kit

Step 1

Lift the lid and bowl from top of the device
Be sure device is not plugged in before beginning replacement of heating element

Step 2

Turn the bowl upside down so that the three legs point upwards

Step 3

Remove the one 7 mm Phillips screw from the side of the brass panel.

Step 4

Remove the 6mm Phillips screw that holds the stainless plate.

Step 5

Remove all four of the 15mm Phillips screws from all four of the brackets that hold the heating element in place

Step 6

Using your hands, remove the heating plate that is on top of heating element.

Step 7

Remove the 7mm Phillips screw that holds the white wire connected to the heating element.

Step 8

Remove the 7mm Phillips screw that holds the white & maroon wires connected to the heating element.

Step 9

Using, your hands, take out the heating element and replace it with a new one.

where can I buy this heating element? Thanks.

Tze Moh Yeo - 05/07/20

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

John David Mitchell

Member since: 01/02/16

146 Reputation

6 comments

where can I buy this heating element? Thanks.

dchang168 - 21/12/16

where can I buy this heating element? Thanks.

Tze Moh Yeo - 11/07/20

where to buy parts is the problem!!

William Co - 04/05/21

not sell tools here but parts, it’s easy to repair but parts is the problem

William Co - 04/05/21

heat elements can be purchased in Taiwan. if you can read Chinese.

chengshiuntsai -

i was able to buy the heating element on ebay!

Michael Huang -