Tineco FLOOR ONE S3 Breeze Brush Roller Replacement

Written By: Dawoud Daoud
  • Comments: 0
Tineco FLOOR ONE S3 Breeze Brush Roller Replacement

Difficulty

Very easy

Steps

2

Time Required

3 minutes

Introduction

The Tineco FLOOR ONE S3 Breeze (model no. FW007600US) will sometimes have problems with the brush roller wearing out over time, and it may need to be replaced by removing the brush roller cover and removing the existing brush roller. After a quick reassembly the machine is ready to operate. This replacement guide contains the following steps for the brush roller replacement.

  1. JroOHMkU2OoAaoKq
    JroOHMkU2OoAaoKq
    kKtRcs1F2cJA2XSV

    • Place a finger on the lever located on the brush roller cover.

    • Firmly push the lever with a finger to remove the brush roller cover.

  2. MqTv2XmObWVXlSEB

    • Grasp the brush roller on its side.

    • Pull the brush roller out of its initial position.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Dawoud Daoud

Member since: 14/02/24

199 Reputation

0 comments