Top Removal

Written By: Kamal Taha
  • Comments: 3
Top Removal

Difficulty

Easy

Steps

2

Time Required

10 minutes

Introduction

We are going to teach you how to disassemble your Master Prep.

  1. OiKNQndSFBmlkGVc

    • Place the blender to the side.

  2. THbWfeWfFkj1d1Wd
    THbWfeWfFkj1d1Wd
    d11xpJ4GlcTKeA1h

    • Remove the two highlighted screws with a Phillips #2 Screw Driver

    • Gently pull off the top.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kamal Taha

Member since: 27/08/15

679 Reputation

3 comments

My unit has something other than Phillips screws holding the top together. It appears to be an Allen head, not a torx, closest fit was a 2mm Allen wrench but that was still too small. What head could this be?

Keith Johnson -

I nave Ninja QB 3001 UKMR 30,

HOW DO I OPEN IT UP

Francisco -

Nutri Ninja

QB3001UKMR 30

DISSAMBLE

Francisco -