Introduction
The Triplett ET200 AC Line Splitter makes it easy to test voltage by giving you a place to put your probe to easily allow testing AC line voltage at the same time you check an outlet for proper wiring.
Tools
-
-
Plug the Triplet ET200 in the outlet or extension cord that you are testing.
-
Before connecting your meter, make sure it is turned on and in the AC Voltage mode and that your range is either auto or over 150VAC
-
Using the 2 wholes marked "Voltage Test", insert your meter leads in these to test.
-
Read the voltage on your voltmeter.
-
You are done. Disconnect your meter and the Triplet ET200
-
Conclusion
Just remove your test leads and disconnect when done.
