Turtle Beach Recon 70P Ear Pads Replacement

Written By: Ryan Momanyi
  • Comments: 0
Turtle Beach Recon 70P Ear Pads Replacement

Difficulty

Very easy

Steps

3

Time Required

5 - 10 minutes

Introduction

Earpads tend to tear after extensive use, disrupting the comfortable experience of using your headset. This guide will take you through the steps to replacing the ear pads on your gaming headset.

  1. KZE5l3bvTAeVaOus
    KZE5l3bvTAeVaOus
    ScqbfJr2oW3hTeMP

    • Gently pull the edge of the ear pads until the leather comes loose from the slot.

    • Be careful to not tear the fabric if you intend to reuse the ear pads.

  2. s2Ky4AD1yyyDmRrA
    s2Ky4AD1yyyDmRrA
    GANSZtwXO1H1xJt5
    5Upbgfoc5SyWSVjR

    • Ensure the ear pad is orientated correctly.

    • To install new ear pads, insert part of the edge of the ear pad into the slot, then gently stretching it over the speaker.

  3. QklSNBqMAWVLVTNk
    QklSNBqMAWVLVTNk
    HkNaLXjFHplKObgn

    • Using your finger nail or an opening pick, push the remaining leather into the slot.

Conclusion

Your ear pads should be replaced if all these steps were followed correctly.

Author

Ryan Momanyi

Member since: 07/02/24

97 Reputation

0 comments