Udreamer Turntable Belt Replacement

Written By: Gustavo Deveze
  • Comments: 0
Udreamer Turntable Belt Replacement

Difficulty

Easy

Steps

6

Time Required

10 - 20 minutes

Introduction

If your Udreamer turntable isn’t spinning properly, the belt might need to be replaced. The belt helps the platter spin so your records play correctly. If it's worn, you might notice slow or uneven spinning, or it might not spin at all.

Check the size of the current belt to ensure the correct replacement size. This video demonstrates how to measure if you are unsure of the size.

Before you begin the repair, unplug the turntable. Also, avoid touching the motor or any electronic parts to prevent damage to your unit.

  1. nitRlJk5C4EkYjaD
    nitRlJk5C4EkYjaD
    MGdAHGAS3QHCe6aT
    fAKVTDRIDGuUrBSK

    • Gently pull off the retaining clip at the center of the turntable platter.

    • Put it in a safe spot to avoid losing it as you will need it for reassembly.

  2. QMXXFEpWSiTxxOtM

    • Lift the platter straight up and off the spindle to reveal the belt and motor assembly underneath.

  3. YksHXMcmdbCjnVLV

    • Carefully stretch the old belt off the motor pulley and platter grooves.

    • Inspect the pulley and platter for debris or damage.

  4. kO4TdZq4JTUeridt
    kO4TdZq4JTUeridt
    NnExwAgEElyTBtr4

    • Position the new belt around the motor pulley and the inner rim of the platter.

    • Ensure the belt lies flat without twists.

  5. ENX1wcJEiNiB1Tmg
    ENX1wcJEiNiB1Tmg
    meuR1IvatEwyEhdQ
    iOx2HRbCLANNLvIx

    • Place the platter back onto the spindle, aligning it with the motor assembly.

    • Hold the belt in place as you lower the platter.

  6. JUUTPZjQArnFrZQp
    JUUTPZjQArnFrZQp
    W11VTGvitJh6yAJZ
    Mt5woRFCE2xdLkuw

    • Press the retaining clip back onto the spindle to secure the platter.

    • Ensure the clip is tightly fastened to prevent the platter from wobbling during use.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Gustavo Deveze

Member since: 16/10/24

133 Reputation

0 comments