Vivedino Troodon Screens and Macros

Written By: Tiny Machines 3D
  • Comments: 1
Vivedino Troodon Screens and Macros

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

  1. QixpcvZsMjSx31fq
    QixpcvZsMjSx31fq
    CgwXukXTE4bbQCCS
    ldYB6CuGRGXENqsg

    • Macro> Z Offset Auto Setup> EZ Z Offset. Follow the prompts and afterwards, your Z Offset will be dialed in and stored.

  2. 2FUsGxvFChfSS1bS
    2FUsGxvFChfSS1bS
    CAOfDdQCp3RjlFbX

    • Macros for different filaments. The temperature changes for each.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Tiny Machines 3D

Member since: 16/11/19

3019 Reputation

One comment

Hello, I am trying to create macros to control my LEDs. I have working ones that turn them off and on, but every time I try to use the M150 command to change colors, it says M150 command not supported. Any ideas?

Thanks for your help!!

Roger “Pork Chop” Porcelli -