Introduction
Use this guide to replace the temperature control board in your Whirlpool WRS315SDHW Refrigerator.
The temperature control board regulates the temperature throughout the refrigerator. If your refrigerator is not cooling properly, your temperature control board might be broken.
Note: Some photos show the doors removed for clarity purposes. Removing them is not required and will not change the procedure.
-
-
Use a 1/4 inch socket wrench, or a flathead screwdriver, to remove the 22.3 mm-long screw securing the temperature control board assembly.
-
-
-
Pull the temperature control board assembly off its slot in the chassis.
-
Let the assembly hang to access its connectors.
-
-
-
Use a flathead screwdriver, or a similar tool, to compress the plastic clip securing the temperature control board.
-
Use another flathead screwdriver to pry up the board from its housing.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
