Xiaomi ROBOROCK S50200 Bottom Disassembly

Written By: hainzy
  • Comments: 0
Xiaomi ROBOROCK S50200 Bottom Disassembly

Difficulty

Moderate

Steps

6

Time Required

20 minutes

Introduction

In this guide, I'll show you how to open the bottom of the Roborock S5 (ROBOROCK S50200) to access the components that need to be replaced from the bottom.

  1. Tqwgh1STS11nBhEc
    Tqwgh1STS11nBhEc
    HaRNvcmjjhFGppEA

    • Turn off the device by pressing and holding the power button.

  2. gYIWOlPGDjxAjCS1

    • Open the cover upwards.

    • Lift the dustbin upward to remove it.

  3. MRidMaLObtQsV1vk
    MRidMaLObtQsV1vk
    VNpdBI5YjcmLLpGt

    • Remove the main brush holder by pressing both locks inward and lifting it up.

    • Remove the main brush.

  4. YSMKxHeWSN2ZObxW
    YSMKxHeWSN2ZObxW
    4RfGMAFiSUNJ6jGp
    DNlrvxMoTITjFfMO

    • Remove the screw holding the side brush.

    • You don't need to completely unscrew the screw; simply loosen it and remove it with the brush.

    • Remove the side brush along with the screw by lifting it upward.

  5. xNh4NgMGBuYr1tKi
    xNh4NgMGBuYr1tKi
    O13UEfCSNei1PMaZ
    FDoYcTC6LHCVsfHr

    • Lift the front wheel with the screwdriver.

    • Completely pull the front wheel upward to remove it.

  6. bjFtwN6F4laHDTKl
    bjFtwN6F4laHDTKl
    QbS6EmIpqMSHHc5G
    SfvYONPYu1QOELlL

    • Remove the seven screws holding the bottom panel.

    • Lift the bottom cover up.

Conclusion

Repeat the steps in reverse order to reassemble the device.

Author

hainzy

Member since: 23/03/23

7613 Reputation

0 comments