Xiaomi ROBOROCK S50200 main brush assembly repair

Written By: hainzy
  • Comments: 0
Xiaomi ROBOROCK S50200 main brush assembly repair

Difficulty

Moderate

Steps

7

Time Required

25 minutes

Introduction

In this guide, I will show you how to replace the main brush assembly.

  1. Tqwgh1STS11nBhEc
    Tqwgh1STS11nBhEc
    HaRNvcmjjhFGppEA

    • Turn off the device by pressing and holding the power button.

  2. gYIWOlPGDjxAjCS1

    • Open the cover upwards.

    • Lift the dustbin upward to remove it.

  3. MRidMaLObtQsV1vk
    MRidMaLObtQsV1vk
    VNpdBI5YjcmLLpGt

    • Remove the main brush holder by pressing both locks inward and lifting it up.

    • Remove the main brush.

  4. YSMKxHeWSN2ZObxW
    YSMKxHeWSN2ZObxW
    4RfGMAFiSUNJ6jGp
    DNlrvxMoTITjFfMO

    • Remove the screw holding the side brush.

    • You don't need to completely unscrew the screw; simply loosen it and remove it with the brush.

    • Remove the side brush along with the screw by lifting it upward.

  5. xNh4NgMGBuYr1tKi
    xNh4NgMGBuYr1tKi
    O13UEfCSNei1PMaZ
    FDoYcTC6LHCVsfHr

    • Lift the front wheel with the screwdriver.

    • Completely pull the front wheel upward to remove it.

  6. bjFtwN6F4laHDTKl
    bjFtwN6F4laHDTKl
    QbS6EmIpqMSHHc5G
    SfvYONPYu1QOELlL

    • Remove the seven screws holding the bottom panel.

    • Lift the bottom cover up.

  7. 5HbMIuqcNFSVIcVx
    5HbMIuqcNFSVIcVx
    lGEdjQdCwAkPHWoY
    sWCqROiKeR4BdBrf

    • Remove the four screws from the main brush assembly

    • Lift out the main brush assembly upwards

Conclusion

Work through the steps in reverse order to reassemble your device.

Author

hainzy

Member since: 23/03/23

7613 Reputation

0 comments