Yoton YB02 Monitor Speaker Replacement

Written By: hsisson
  • Comments: 0
Yoton YB02 Monitor Speaker Replacement

Difficulty

Moderate

Steps

4

Time Required

7 minutes

Introduction

Are you having trouble hearing your child through the YOTON YB02 baby monitor? If so, here’s a guide on how to replace the monitor’s speaker and solve your problem. The monitor speaker on the YB02 baby monitor is used to help parents hear their child's needs from another room. This feature on the YOTON YB02 is very important to help parents monitor their child. Before checking this guide, try to turn off and restart your baby monitor to confirm the speaker is faulty.

  1. cBhMPCOZsmrfZSHw

    • Use a Phillips #0 screwdriver to remove the four 7 mm screws from the back panel of the monitor.

  2. yWb4GH2DLAt3OiPh
    yWb4GH2DLAt3OiPh
    m65RPaJ1NuPNK25S

    • Use a plastic opening tool to separate the back panel from the monitor.

    • It is recommended to start from a corner, and run the tool along the edge of the panel.

  3. MHp5RkIvHGJdgobi
    MHp5RkIvHGJdgobi
    3vYpshcfJZCdnYOn

    • Using the plastic tool, disconnect the cables connecting the speaker to the motherboard.

  4. dmgP3q4Up6iwSQWw
    dmgP3q4Up6iwSQWw
    Lbl2wcbQh34uhqWQ

    • Using the metal spudger, pry off the speaker from the back panel.

    • It is recommended to scrape off excess glue holding the speaker to the panel with the spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

hsisson

Member since: 15/02/24

811 Reputation

0 comments