ZCWA BR151 Battery Replacement

Written By: Kaitlyn Baltz
  • Comments: 2
ZCWA BR151 Battery Replacement

Difficulty

Easy

Steps

6

Time Required

5 - 10 minutes

Introduction

If you need to install a new battery in your ZCWA BR151 vacuum, you can access the battery panel on the underside of the device using this guide. The battery is easily accessible, so there is no need to remove any additional parts to access it. You will not need to do any difficult steps, but extract the battery carefully.

  1. khL162rHJj1UNFr6

    • Turn off the device.

  2. ILLh34buEXYPjmMo
    ILLh34buEXYPjmMo
    hDXAKXKJSw4tNJRF

    • Remove the water tank by sliding the latch down with a finger and grasping the bottom of the water tank.

    • Pull it out.

  3. AmmJQAG3tFP4DyHt
    AmmJQAG3tFP4DyHt
    Pmgb4LIvZielUbYH

    • Flip the device over to access the panels on the back.

    • Rotate the device to where the battery panel is closest to you.

    • Using a Phillips #1 screwdriver, remove the two 10 mm screws from the battery panel.

  4. GOPbXBUq4nSUOYxA
    GOPbXBUq4nSUOYxA
    JUEiBDRNtVpwIJRj

    • From the opposite end of the battery wires, use an opening tool to pry the battery out.

    • Do not use metal objects to pry out the battery.

    • You may need to rotate the device depending on your hand prominence.

  5. hTthdSAxyRGm1VXS

    • Peel off the electrical tape that wraps around the battery's wire connectors.

  6. pBgVZZGSLuosGbYV
    pBgVZZGSLuosGbYV
    CPSvSZWaVDTOGaX5

    • Pinch the two lock mechanisms on the wire connectors while pulling them apart.

    • Set aside the old battery to dispose of later.

    • Batteries can be safely disposed of at your local recycling center with the help of a professional.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kaitlyn Baltz

Member since: 23/01/24

419 Reputation

2 comments

Ok cool I hope it works

Blueobear -

Where to buy the replacement battery and what is the part number

Andre Bellanger -