ZTE Jasper LTE Camera Replacement

Written By: Anthony Sou
  • Comments: 0
ZTE Jasper LTE Camera Replacement

Difficulty

Moderate

Steps

5

Time Required

6 minutes

Introduction

This replacement guide will assist you in replacing the rear-facing camera, step-by-step. You will use this guide when the camera images have become distorted, blurry, dark, or discolored, and you have already taken other measures (clean off the camera lens and updated any appropriate software) to try and get it working.

  1. H2K1VYPMDTOEG1eY

    • Insert the spudger into the bottom left corner of the phone.

    • Use the spudger to loosen the back cover.

  2. IKmxWXJpt1WgSGKU

    • Insert the black spudger near the bottom left of the battery. There will be an opening to easily to remove the battery.

    • Continuing to use tool, prop up the battery and remove it.

  3. lwuIFyNVTom22FSo
    lwuIFyNVTom22FSo
    XlvvYwGwDHSQrgX3

    • Remove nine 0.8mm Phillips #00 screws.

  4. MOT6AETUZBuRwYeu
    MOT6AETUZBuRwYeu
    rlZpZIWGQvbvQbBe

    • Remove the back cover by pulling upwards.

    • Removing the back cover may take a bit of force.

  5. JyCLyXlERR3yXBUj
    JyCLyXlERR3yXBUj
    B6uhHgOvsj1pMdBM
    6UU3QlaRSdKH3udK

    • Disconnect the gold component attached to the camera by pulling upwards using the tweezers.

    • Remove the camera using the tweezers by gripping tightly around the camera and pulling upwards.

    • Camera is attached to the motherboard with adhesive. As such, you may need to use light force to remove the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Anthony Sou

Member since: 22/04/19

391 Reputation

0 comments