Introduction
This is a repair guide for the removal of the filter of the Eufy Clean RoboVac G32 Pro. The filter helps the vacuum separate dust and debris. A clean filter is recommended for best vacuum use, which is why they should be removed, cleaned, and replaced at least every two weeks. (If the vacuum is being used daily) It's time to clean the filter if you notice the vacuum isn't picking much up or is leaving dirt or debris on the ground.
-
-
Grab the blue clasp and push up and pull out at the same time.
-
Remove the dustbin and the filter.
-
-
-
Press down on the blue clasp and separate the two sides of the dust bin by pulling them open like a book.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
