Introduction
This is the guide on removing the bottom case from the iNNEXT N64 Classic Controller. Before you begin, make sure that your controller is disconnected from the console.
-
-
Turn the controller face down.
-
Use a Phillips #00 screwdriver to remove the eight screws on the back of the controller.
-
-
-
Insert an opening tool into the seam between the top and bottom case.
-
Work your way around edge of the controller to release the tabs connecting the top and bottom of the controller.
-
Remove the bottom case from the controller.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
