iPad 4 Wi-Fi Headphone Jack Cable Replacement

Written By: Walter Galan
  • Comments: 0
iPad 4 Wi-Fi Headphone Jack Cable Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Internal prereq.

  1. caMHL5nU3T3DgZRm
    caMHL5nU3T3DgZRm
    KU3cQwbXlDIbX5FR
    UrGlviLCXWEPDcnj

    • Use tweezers to peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.

    • Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

  2. gKl2tNYxSYVSmnZc
    gKl2tNYxSYVSmnZc
    oYKXUlvJtXbfIYUL

    • Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.

    • Pull the headphone jack assembly cable straight out of its socket on the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

701292 Reputation

0 comments