iPhone 16 Pro Max Earpiece Speaker Installation

Written By: Arthur Shi
  • Comments: 0
iPhone 16 Pro Max Earpiece Speaker Installation

Difficulty

Moderate

Steps

3

Time Required

1 - 2 hours

Introduction

Installation steps for the earpiece speaker in the iPhone 16 Pro Max.

  1. FpQ1DAxMwAbbEmXf
    FpQ1DAxMwAbbEmXf
    TNfQCXaPmeqZMXae

    • Align the top edge of the earpiece speaker with the top edge of the frame

    • Lay the earpiece speaker into its recess.

    • You may need to push the speaker upwards towards the top edge of the frame in order to get it to seat properly.

  2. 1dLniXPvFr3rYy6q
    1dLniXPvFr3rYy6q
    dMnHGuosx3iKTYVi

    • Install the six screws securing the earpiece speaker:

    • One 2.4 mm‑long Phillips screw

    • Three 1.3 mm‑long Phillips screws

    • One 1.6 mm‑long Phillips screw

    • One 3.3 mm‑long standoff screw

  3. Pp5LJhARmlhYcTjP

    • Use your finger or a spudger to press the earpiece speaker connector onto the logic board.

    • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Author

Arthur Shi

Member since: 03/01/18

282916 Reputation

0 comments