iPhone 16 Pro Max Front Camera Installation

Written By: Arthur Shi
  • Comments: 0
iPhone 16 Pro Max Front Camera Installation

Difficulty

Moderate

Steps

3

Time Required

1 - 2 hours

Introduction

Installation steps for the front camera module in the iPhone 16 Pro Max.

  1. 4x45ib55hqA3t6WZ
    4x45ib55hqA3t6WZ
    C2WwgarSWWsFQMvJ

    • Lay the front camera assembly in its recess.

    • Gently tuck the camera flex cables into the gap between the rear camera assembly and the earpiece speaker assembly.

  2. 555iKU4BUCD2DK4p
    555iKU4BUCD2DK4p
    WPA5NGECeDWgUZNj

    • Use your finger or a spudger to press and connect the two camera connectors onto the logic board.

    • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

  3. wiMWLMTXNDy3kwwF

    • Use your finger or a spudger to press and connect the earpiece speaker and the mmWave antenna connectors onto the logic board.

Author

Arthur Shi

Member since: 03/01/18

282916 Reputation

0 comments