iPhone 16 Pro Max LiDAR Sensor Installation

Written By: Arthur Shi
  • Comments: 0
iPhone 16 Pro Max LiDAR Sensor Installation

Difficulty

Moderate

Steps

3

Time Required

1 - 2 hours

Introduction

Installation steps for the LiDAR sensor in the iPhone 16 Pro Max.

  1. o4cNoSVxNFSMLZDK
    o4cNoSVxNFSMLZDK
    ERJchm3SCYLWZgPw

    • Lay the LiDAR sensor in its recess.

  2. RnXBOGYjIURWZmYt

    • Use a Phillips screwdriver to install the two screws securing the LiDAR sensor:

    • One 1.6 mm‑long screw

    • One 2.9 mm‑long screw

  3. Rscc5EvXFYRUqYwt

    • Use your finger or a spudger to press and connect the LiDAR sensor connector to the logic board.

    • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Author

Arthur Shi

Member since: 03/01/18

282916 Reputation

0 comments