iPhone 16 Pro Max LiDAR Sensor Removal

Written By: Arthur Shi
  • Comments: 0
iPhone 16 Pro Max LiDAR Sensor Removal

Difficulty

Moderate

Steps

3

Time Required

1 - 2 hours

Introduction

Removal steps for the LiDAR sensor in the iPhone 16 Pro Max.

  1. c1VcNAMnCN3aQbGu
    c1VcNAMnCN3aQbGu
    6FEQ1emtEVYOrgkk

    • Use the point of a spudger to pry up and disconnect the LiDAR sensor connector.

  2. lgxvFN1N2DyWGSaO
    lgxvFN1N2DyWGSaO
    RnXBOGYjIURWZmYt

    • Use a Phillips screwdriver to remove the two screws securing the LiDAR sensor:

    • One 1.6 mm‑long screw

    • One 2.9 mm‑long screw

  3. ERJchm3SCYLWZgPw
    ERJchm3SCYLWZgPw
    o4cNoSVxNFSMLZDK

    • Use your fingers or tweezers to lift and remove the LiDAR sensor.

Author

Arthur Shi

Member since: 03/01/18

282916 Reputation

0 comments