iPhone 16 Taptic Engine Installation

Written By: Spencer Pennington
  • Comments: 0
iPhone 16 Taptic Engine Installation

Difficulty

Moderate

Steps

5

Time Required

No estimate

Introduction

  1. cP6AarsCaMoIjJHi
    cP6AarsCaMoIjJHi
    xZiLAxKn62eoQI1L

    • Place the Taptic Engine into its recess in the frame.

  2. LEh4lqPgZGnQlHBy
    LEh4lqPgZGnQlHBy
    MmbvTkQPVsH5AHfJ

    • Use a Phillips screwdriver to install the two screws securing the Taptic Engine:

    • One 2.2 mm‑long screw

    • One 1.7 mm‑long screw

  3. q33KYJDS1YgBIvxG
    q33KYJDS1YgBIvxG
    YWcM3TZsJxcjGLqN

    • Use the flat end of a spudger to connect the Taptic Engine press connector.

  4. bxJPpbvkvA6j2MRK
    bxJPpbvkvA6j2MRK
    uK6ZJKpuXSMbCDYV

    • Use tweezers or your fingers to place the bracket over the Taptic Engine press connector.

  5. EFK4AEH2QfGeHdSD
    EFK4AEH2QfGeHdSD
    MpTC4SDCVAC5mtDC

    • Use a Phillips screwdriver to install the two 1.8 mm‑long screws securing the Taptic Engine bracket.

Author

Spencer Pennington

Member since: 09/09/23

17064 Reputation

0 comments