Anker Soundcore A3102 Partial Teardown

Written By: Daniel Bui
Published: 24/11/18
  • Comments: 1

Anker Soundcore A3102 Partial Teardown

Published: 24/11/18

Teardown

Introduction

  1. Xd5QVa3ncGm5lSnB
    Xd5QVa3ncGm5lSnB
    IsrqYS2EowELwxEO

    • Insert metal spudger between metal grill and rubber.

    • Pry the grill off.

    • Grill is held on with adhesive.

  2. bqCj4VCGUJguSYrm

    • Unscrew 8 screws using a size 1 phillips head screwdriver.

    • Screws may be difficult to remove.

    • 4 screws are around each audio driver, totaling 8.

  3. eIb6XYMMVicfvPoE
    eIb6XYMMVicfvPoE
    jVfTRy5pKevr5O4I
    AYvBCDIxumXrg3MD

    • Using the same prying method in Step 1, remove the plastic holder for the two speakers.

    • Carefully lift up and away from the rest of the device.

    • There are speaker wires that permanently connect the audio drives to the board.

Author

Daniel Bui

Member since: 01/03/16

115 Reputation

One comment

Where can i buy a replacement motherboard for this speaker i have one that i want to repair

Belle -