Roborock Q7 Max: Teardown

Written By: DegenFixer
Published: 24/09/24
  • Comments: 0

Roborock Q7 Max: Teardown

Published: 24/09/24

Teardown

Introduction

This is just a general teardown guide for the robotic vacuum cleaner Roborock Q7 Max.

  1. aJYhUNwtDq3smAIC
    aJYhUNwtDq3smAIC
    GsqwECG1sgdfIGDg
    MLwWIVbB4sBbO2M6

    • Begin by pulling off the front half.

    • Unscrew the screws, remove the plastic tabs.

    • Remove the back half.

  2. 3yB1o4gvyZbPySQI
    3yB1o4gvyZbPySQI
    IEYjCTNOrPoSdYPv
    HQAqeAcmRcaiaNBp

    • Remove the LiDAR cage.

    • 2 of the screws are covered by rubber tabs. I remove these by stabbing them with precision tweezers.

    • Remove the LiDAR.

  3. JtVGpYQdUQcUMkMB
    JtVGpYQdUQcUMkMB
    NBlQZcLhoncVyVMb

    • Remove the bottom cover and side brush.

    • Remove the battery.

  4. pXfH3dOgs3LfHnFc
    pXfH3dOgs3LfHnFc
    K35xCnspZqKlwvJC

    • Remove the bumper. These screws are all PH1.

  5. bocBS1BwKckOToKY

    • What does she see?

  6. hVso3EQfkLML3Xqd

    • Remove the side brush.

  7. JD6doM1RXTSXuiRR
    JD6doM1RXTSXuiRR
    BRLSkXcDU16BWZ1O

    • Remove the screws holding the chassis halves together.

  8. JGnRIBndanivf6ow
    JGnRIBndanivf6ow
    OJVvuLakpFptcXYH

    • Flip it over, then pull it apart.

    • It is still held together by 2 latches that are pointed to in the first image. Give it a firm tug.

Author

DegenFixer

Member since: 18/09/24

4477 Reputation

0 comments