Epomaker Shadow-X Keycap Replacement

Written By: Beck Spitler
  • Comments: 0
Epomaker Shadow-X Keycap Replacement

Difficulty

Easy

Steps

5

Time Required

10 minutes

Introduction

Use this guide to replace worn-out or damaged keycaps on the Epomaker Shadow-X mechanical keyboard, or to customize it with new keycaps. Keycap replacement is a straightforward process, and this guide will help ensure each step is done safely.

  1. EKEbpB5epXkEurAu

    • Power down the keyboard and unplug any attached cables.

  2. MuCNoaCZoGyDLVLY

    • Place the tool around the keycap, with the prongs on opposite sides of the key.

    • Gently pull the keycap up and off the switch stem.

    • Avoid pulling at an angle to prevent damaging the stem or keycap.

  3. gHPRjVYoDmUuFMD1
    gHPRjVYoDmUuFMD1
    FxfbNURDV5KCKZfw
    WLm2eDOt4mB6Avqe

    • For larger keys, such as the Spacebar, Shift, or Enter, insert the puller evenly on both sides.

    • If using a pry tool, pry the middle first, then evenly on both sides.

    • Lift gently, using tweezers to stabilize any clips if necessary to prevent them from snapping.

  4. 6EJqrEkelOFZuXd1
    6EJqrEkelOFZuXd1
    ur4vMUgPEM2AL5EK
    6jTP1mJufwbTL4CY

    • Align the new keycaps, positioning the new keycaps over the switch stem, making sure it's centered.

    • Press straight down, applying even pressure until the keycap clicks into place.

  5. EDwsW4JOlq4HCj3c
    EDwsW4JOlq4HCj3c
    GEtIoIwTDmZSFAjd

    • Once all keycaps are installed, reconnect the keyboard to power and test each key for proper fit and function.

Conclusion

You have successfully replaced the keycaps on your Epomaker Shadow-X keyboard! The new keycaps should enhance both the aesthetic and feel of your keyboard. Test each key to ensure they are securely attached and functioning smoothly, and enjoy the refreshed look of your setup.

Author

Beck Spitler

Member since: 28/08/24

611 Reputation

0 comments