How to Apply the Power Button Board Adhesive in your Kobo Clara eReader

Written By: Alex Diaz-Kokaisl

Comments: 1

How to Apply the Power Button Board Adhesive in your Kobo Clara eReader

Difficulty

Easy

Steps

Time Required

5 - 10 minutes

Introduction

Use this guide to replace the adhesive underneath the power button board or replace a power button board altogether in your Kobo Clara eReader, Colour or BW edition.

Tools

Parts

Tesa 61395 Tape

Step 1

If you're transferring your power button board to a new screen, follow the next three steps. Otherwise, skip to this step to install a new power button board.
Use tweezers, or your fingers, to remove any remaining adhesive on the bottom of your power button board.
Make sure the board is as clean as possible so the replacement adhesive sits evenly on the frame.

Step 2

Measure and cut a few strips of a thin double-sided tape, like Tesa tape, and apply it to the bottom of the power button board.
Peel off the liners from the strips to expose the adhesive.

Step 3

Place the power button board on its spot on the frame, making sure it's aligned with its two pegs.
Press down on the power button board to adhere it.

Step 4

Use a spudger, or your fingers, to remove the remaining adhesive at the power button board's spot on the frame.
Apply a few drops of isopropyl alcohol (>90%) to the power button board's spot on the frame.
Use a coffee filter or a lint-free cloth to wipe off any remaining adhesive residue.
Make sure the spot is as clean as possible so the replacement adhesive sits evenly on the frame.

Step 5

Peel off the liner on the bottom of the new power button board to expose the adhesive.
Place the power button board on its spot on the frame, making its aligned with its two pegs.
Press down on the power button board to adhere it.

Conclusion

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers Community for help.

One comment

Salve al mio Kobo aura si è rotto il pulsante di accensione e si avvia solo se viene dato il consenso collegandolo ad un carica batteria. Una volta acceso funziona regolarmente con tutte le sue funzioni. Esiste un pulsante di ricambio?

Grazir

Giampiero -