TOGUARD C310 Dual Dash Cam Screen Replacement

Written By: Omar Flores
  • Comments: 0
TOGUARD C310 Dual Dash Cam Screen Replacement

Difficulty

Moderate

Steps

5

Time Required

20 - 40 minutes

Introduction

This guide is used to replace the LED screen of your TOGUARD C310 Dual Dash Cam.

You must be extremely careful when removing the screen and moving other components to access it.

  1. TlU5amQIVScOWhKl
    TlU5amQIVScOWhKl
    YZJTJexOOwIFXIrU

    • Use a screwdriver to remove the four corner screws on the face of the dash cam.

  2. C1DfPHbhXgd1wXsf
    C1DfPHbhXgd1wXsf
    TXSfpDvgNFTAyVXj

    • Gently remove the cover from the screen.

  3. yKT6ecOZ6QRq2Zdt
    yKT6ecOZ6QRq2Zdt
    6OotVbhJoSDEL1S5

    • Use a screwdriver to remove the two screws.

  4. S4KaRTx6PTRjaqyg
    S4KaRTx6PTRjaqyg
    KyfTO5WIBTsiAcNs

    • Turn over the motherboard and remove the two screws.

  5. JkdqfIVtANAOl4Rk

    • Disconnect the ribbon cable from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.

Author

Omar Flores

Member since: 09/09/24

171 Reputation

0 comments