Turtle Beach Recon 70P Speakers Replacement

Written By: Austin Hance
  • Comments: 0
Turtle Beach Recon 70P Speakers Replacement

Difficulty

Difficult

Steps

4

Time Required

30 - 50 minutes

Introduction

The speakers on your headset ensure that you can hear the device you are connected to. It is possible that speakers may get damaged, produce distorted sound, or stop working entirely. This guide will help you replace your headset's speakers. The removal process is the same for both the left and right speakers.

  1. Ea4HwWXsZKkVxhKK
    Ea4HwWXsZKkVxhKK
    JpfuGlUCVVnDTyMA
    mBW4sje3HRO5RJDc

    • Before continuing, remove the ear pad(s) from the nonfunctional speaker(s) following the earpad replacement guide.

    • Use a spudger to pry up and remove the black plastic cover.

  2. C66wSebjI4G6mY6e
    C66wSebjI4G6mY6e
    RBtQioSGK31IMABK

    • Use flush cutters to cut the wires as close to the speaker connections as possible.

  3. 1CE1IsxQiUYxgPUO
    1CE1IsxQiUYxgPUO
    bMD3gjUelTKUsFHh
    FksP2KnRTcXAN1qX

    • Use a spudger to pry the speaker out of its housing.

    • The speaker is attached to the housing with adhesive, so moderate force may be necessary to pry it out of place..

  4. PnQ4fWJnmKfsGZqw
    PnQ4fWJnmKfsGZqw
    dOxQ3YpKwXrLJHfv

    • Insert the new speaker into the plastic housing, sealing it in place with glue or tape.

    • Solder the wires in the order they were previously found.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Austin Hance

Member since: 05/02/24

588 Reputation

0 comments